GE LOGIQ V1 - System Presets

Presets
LOGIQ V2/LOGIQ V1 – User Guide 3-3
Direction 5610736-100 Rev. 9
System Presets
Foreign Language and Keyboard Setup (For R1.0.x)
NOTE: You must apply the changes on each setup page before moving
to the next page.
1. In Utility--> System--> General -> Location, select Regional
Options.
Figure 3-1. Regional Options
2. The Regional and Language Options Screen displays. In
the Regional Options tab, under Standards and Formats
select desired language, under Location select desired
location.
Figure 3-2. Regional Options