GE LOGIQ V1 - Contact GE Service

Onboard Help
LOGIQ V2/LOGIQ V1 – User Guide 6-41
Direction 5610736-100 Rev. 9
Maintenance (continued)
Contact GE Service
Figure 6-30. Contact GE Service
1/2 Users can contact a GE service center
by phone, or directly from the
ultrasound device if a network
connection is available.
There is a Contact GE logo in the
lower left hand corner of monitor. Click
on this icon, and a pop-up menu will
appear. Select ContactGE.
2/2 Complete the required fields identified,
including: Name, Problem Type,
Problem Area, and Problem
Description. Once these fields are
complete click Send to submit.