GE LOGIQ V1 - Quantitative Analysis (QAnalysis)

Quantitative Analysis (QAnalysis)
LOGIQ V2/LOGIQ V1 – User Guide 2-45
Direction 5610736-100 Rev. 9
Quantitative Analysis (QAnalysis)
NOTE: Quantitative Analysis is optional in LOGIQ V2/LOGIQ V1.
Quantitative Analysis is available for the following CINE loops
obtained in the following modes: Tissue Velocity Imaging, Color
Flow Mode, Power Doppler Image. All of the Quantitative
Analysis modes operate similarly, with some variation.
Activating QAnalysis
1. Scan and Freeze the patient in the desired live mode or
recall a desired cine loop from the stored images.
NOTE: QAnalysis is only available when the system is in CINE
mode.
NOTE: Images from the current scan session acquired in the
desired analysis mode (already in CINE) or from a saved
image loop can be used for QAnalysis.
2. QAnalysis displays on the Cine Primary Menu.
3. Select QAnalysis. The QAnalysis screen and QA Primary
Menu displays. To toggle the trackball function between QA
and Scroll, press the Scan Area on the control panel.
Exiting QAnalysis
There are several methods to exit QAnalysis.
• Select Exit QAnalysis on the QA Primary Menu.
• Press Freeze to unfreeze and resume scanning.
• Press any other button that returns the system to real-time
scanning.