System Care and Maintenance
LOGIQ V2/LOGIQ V1 – User Guide 3-45
Direction 5610736-100 Rev. 9
System Software Updates (Software Download)
Software Updates for the unit may be available for download
and installation. When a Software Update is available, a
message icon is displayed on the system exit window.
Only users with administrator rights are allowed to download
Software Updates. You first download the software, then install
the software. It is a two-step process.
Once the software installation has begun, the system is not
usable until the software installation is done. The installation
can take up to 45 minutes to complete. While installing, DO
NOT turn off system power or the system can be left in a
unusable mode. For this reason, you may want to perform the
software download one evening and then install the software the
next evening.
After the software installation is complete, you will be asked to
perform a few system functional checks to determine normal
system operation.
NOTE: A software download may take more than 1 hour (and may take
several hours), depending on local network conditions. During
this time, you cannot perform any other function. Please allow
sufficient time to complete the software download and
installation.
NOTE: Please ensure network connection when downloading software.
NOTE: After you press a software download button, it may take up to
three (3) seconds for the system to respond.
NOTE: Software Updates through the GE service platform may not be
available in all countries.
To Next Page
Loading...
