GE LOGIQ V1 - To Edit a Worksheet; To Change Data on a Worksheet; To Type a Comment on a Worksheet

Measurement and Analysis
LOGIQ V2/LOGIQ V1 – User Guide 2-65
Direction 5610736-100 Rev. 9
To edit a worksheet
To change data on a worksheet:
1. To position the cursor at the field you want to change, move
the Trackball. The field is highlighted.
2. Press Set.
3. Type the new data in the field. The new data is displayed in
blue to indicate that it was manually entered.
To delete or exclude data on a worksheet:
1. To position the cursor at the field you want to delete or
exclude, move the Trackball. The field is highlighted.
2. Do one of the following:
• To delete the field, select Delete Value.
• To exclude the field, select Exclude Value.
The data in the field is not visible and is not included in
worksheet calculations.
• To include a value that you previously excluded, select
Exclude Value.
To type a comment on a worksheet:
1. Select Examiner’s Comments. The Examiner’s Comments
window opens.
2. Type comments about the exam.
3. To close the Examiner’s Comments window, select
Examiner’s Comments.
To turn the volume measurement value off:
• Select the method type Off.
HINTS
Some fields on the worksheet are view only, and others you
can change or select. To easily see which fields you can
change or select, move the Trackball. As the cursor moves
over a field that you can change or select, the field is
highlighted.