Safety Precautions
LOGIQ V2/LOGIQ V1 – User Guide 4-19
Direction 5610736-100 Rev. 9
General Notice
1. Designation of Peripheral Equipment Connectable to This
Product.
The equipment indicated in the Supplies/Accessories
section can be hooked up to the product without
compromising its EMC performance.
Avoid using equipment not designated in the list. Failure to
comply with this instruction may result in poor EMC
performance of the product.
2. Notice against User Modification
The user should never modify this product. User
modifications may cause degradation in EMC performance.
Modification of the product includes changes in:
a. Cables (length, material, wiring, etc.)
b. System installation/layout
c. System configuration/components
d. Securing system parts (cover open/close, cover
screwing)
3. Operate the system with all covers closed. If a cover is
opened for some reason, be sure to shut it before starting/
resuming operation.
4. Operating the system with any cover open may affect EMC
performance.
To Next Page
Loading...
