GE LOGIQ V1 - Foreign Language and Keyboard Setup (for R1.1.X)

Presets
LOGIQ V2/LOGIQ V1 – User Guide 3-7
Direction 5610736-100 Rev. 9
Foreign Language and Keyboard Setup (For R1.0.x) (continued)
9. After the system restarts, the system appears in the
selected language.
NOTE: Press Ctrl+Shift to change the input method, press Alt+Shift to
change the input language.
NOTE: To have the settings take effect, you MUST turn off the system
and turn it back on.
NOTE: Service password does not work for Greek and Russian
language settings. Change the setting to English.
Foreign Language and Keyboard Setup (For R1.1.x)
NOTE: You must apply the changes on each setup page before moving
to the next page.
1. In Utility -> System -> General, select Regional Options.
Figure 3-9. Region Option
2. Under Formats select desired language.