GE LOGIQ V1 - Date;Time Set-Up

Using Onboard Help
6-10 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
System Setting (continued)
Date/time set-up
Figure 6-14. Date/Time set-up
For R1.0.x software:
Press Utility key and then select
General tab. To set the Date/Time press
the Date/Time button within the Date/
Time category.
For R1.1.x software:
Press Utility key and then select
General tab. To set the Date/Time press
the Date/Time (restart needed) button
within the Date/Time category.