Presets
LOGIQ V2/LOGIQ V1 – User Guide 3-21
Direction 5610736-100 Rev. 9
EZBackup and EZMove (continued)
5. Verify the information on the EZBackup/EZMove Wizard,
Page 2. The backup may span multiple media. This page
tells you how many media you need to do this backup. After
you have gathered the media (allow for one extra media,
just in case), you are ready to begin the backup. Press Next.
If the storage capacity of the USB HD is insufficient, you will
see the message, “Selected Location does not have enough
free space.”
NOTE: The calculation for the number of backup CDs is only an
estimate. Allow for one additional CD when performing an
EZBackup/EZMove.
Figure 3-23. EZBackup/EZMove Wizard, Page 2
To Next Page
Loading...
