Connect the e-license to the
software
Follow the steps below to connect the e-license to the software.
ActionStep
In the Configure e-License dialog:1
Click Browse and navigate to the location of your saved e-license, then click
Open to transfer the search path to the file into the e-License Configuration
dialog.
Click the Configure e-License button.2
Result: A confirmation dialog opens, showing that the configuration has
been successful.
Click OK in the confirmation dialog, then close the Configure e-License dialog.3
100 ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
4 Installation
4.3 Software installation
4.3.2 Configure an e-license
To Next Page
Loading...
