NOTICE
If UniNet cables are disconnected during a run, the run will be in-
terrupted and must be restarted. Make sure that cables are prop-
erly secured before starting a run and avoid moving system units
during a run.
Maintenance
WARNING
Electrical shock hazard. All repairs should be done by service
personnel authorized by GE. Do not open any covers or replace
parts unless specifically stated in the user documentation.
WARNING
Disconnect power. Always disconnect power from the instrument
before performing any maintenance task.
WARNING
Always clean the equipment in a well ventilated area. Never
immerse any part of the equipment in liquid or spray liquid on the
equipment. Always make sure that the equipment is completely
dry before connecting to a mains power source. Make sure to follow
all environmental, health, and safety guidelines pertaining to the
materials used.
WARNING
Use only approved parts. Only spare parts and accessories that
are approved or supplied by GE may be used for maintaining or
servicing the product.
24 ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
2 Safety instructions
2.1 Safety precautions
To Next Page
Loading...
Need help?
General
