gefran SIEIDrive ADL300

ADL300 • Functions description and parameters list 115
21 External fault
22 Speed fbk loss
23 Overspeed
24 Speed ref loss
25 Emg stop alarm
26 Power down
27 Phaseloss out
28 OV safety
29 Safety failure
30 Mot phase loss
31 Ropes change
32 Not Used
33 Plc1 fault
34 Plc2 fault
35 Plc3 fault
36 Plc4 fault
37 Plc5 fault
38 Plc6 fault
39 Plc7 fault
40 Plc8 faul
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
- 4780 Alarm PLC UINT16 0 0 0 ER FVS
This parameter displays the state of the alarms generated by the application written with the internal PLC.
Bit Description
0 1 = PLC 1 fault active
1 1 = PLC 2 fault active
2 1 = PLC 3 fault active
3 1 = PLC 4 fault active
4 1 = PLC 5 fault active
5 1 = PLC 6 fault active
6 1 = PLC 7 fault active
7 1 = PLC 8 fault active
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
- 6000 Null UINT32 32BIT 0 0 0 ER FVS
This signal forces the variable to the zero level (always disabled).
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
- 6002 One UINT32 32BIT 1 1 1 ER FVS
This signal forces the variable to level one (always active)..
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
- 6006 Current limit state BIT 16BIT 0 0 1 ER FVS
This signal is activated when the drive is in the current limit condition.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
- 6372 DS417 status word UINT16 16BIT 0 0 65535 ER FVS
This parameter displays the status word according to the DS417 Prole. For more information reference should be made to
the eldbus manual.