gefran SIEIDrive ADL300

ADL300 • Functions description and parameters list 21
If set to a value of less than 100 the lift will tend to accelerate over a longer distance.
If set to a value of more than 100 the lift will tend to accelerate over a shorter distance.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
5.2.9 11056 Percent dec factor Perc FLOAT 100.00 10 10000 RW FVS
Setting of the deceleration factor multiplier.
If set to 100 the ramp uses the factors entered in the parameters.
If set to a value of less than 100 the lift will tend to decelerate over a longer distance.
If set to a value of more than 100 the lift will tend to decelerate over a shorter distance.