2 ADV100 • Quick installation guide - Specifications and connection
Information about this manual
The ADV100 Quick start guide is a handy-sized manual for mechanical installation, electrical connection and fast
start-up.
The manual explaining the functions and a description of the parameters and the expansion card and eldbus manuals
can be found on the CD provided with the drive.
Software version
This manual is updated according the software version V 1.X.0.
Variation of the number replacing “X” have no inuence on the functionality of the device.
The identication number of the software version is indicated on the identication plate of the drive or can be checked
with the Firmware ver.rel - PAR 490 parameter, menu 2.6.
General information
Note ! In industry, the terms “Inverter”, “Regulator” and “Drive” are sometimes interchanged. In this document, the term “Drive” will be used.
Before using the product, read the safety instruction section carefully. Keep the manual in a safe place and available to
engineering and installation personnel during the product functioning period.
Gefran S.p.A has the right to modify products, data and dimensions without notice. The data can only be used for the
product description and they can not be understood as legally stated properties.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improvingthis manual. The e-mail address is
the following: techdoc@gefran.com.
All rights reserved
To Next Page
Loading...
Need help?
General
