gefran SIEIDrive ADV100 - Connection of Standard EXP-DE-I1-ADL Feedback Card (ADV120 Series)

36 ADV100 • Quick installation guide - Specifications and connection
7.2.3 Connection of standard EXP-DE-I1-ADL feedback card (ADV120 series)
Note! This section describes the connections of standard card, for more information see Appendix.
All feedback card terminal strips are extractable.
Figure 7.2.4: Connection of shielding (recommended)
Note ! The encoder power supply must be adequate considering the cable length and the absorption rates as shown in table (1) at the end of this chapter.
Digital Incremental Encoder. This is the default card supplied with drives ADV120-...- to control asynchronous motors
in eld-oriented ux vector mode (FOC).
EXP-DE-I1-ADL
• X5
B
-
B
+
A
-
A
+
0VE
out
+VE
out
10 11 12 13 14 15