gefran SIEIDrive ADV100 - Connection Diagrams; Regulation Potentials, Digital I;O

38 ADV100 • Quick installation guide - Specifications and connection
7.4 Connection diagrams
Note! This chapter describes the typical wiring diagrams with reference to ADV100 1.X drives with standard configuration.
7.4.1 Regulation potentials, digital I/O
Shielded cable
Chassis
0V
+24V_OUT
0V (24V)_OUT
Isolated power supply
for Inputs/Outputs
Analog input 1 (Multiref 0 src)
Analog input 2
Analog output 2
Analog output 1
47
45
-10V out
+10V out
43
42
41
40
Resettable fuse
Shielded cable
Chassis
46
44
49
48
Chassis
12
11
56
57
54
55
(Relay 1)
(Relay 2)
0V(+24V)
HW Enable
Digital input 1
9
8
DI COM
+24V
10
Digital input 2
7
Digital input 3
6
Digital input 4
5
Digital input 5
4
Digital input 6
3
Figure 7.4.1: Potentials of the control section, Digital I/O PNP connection
12
7
5
9
4
8
6
10
11
Monitor Indietro FR
Enable
Sorgente Avanti FR
Sorg sel multi rif 0
Sorg sel multi rif 1
Sorg reset guasti
+24V OUT
Digital input 3
Digital input 1
Digital input 2
Digital input 4
Digital input 5
COM-DI
0V 24V
Abilitazione
3
Non usato
Digital input 6
Figure 7.4.2: Connections for Controls Opto-insulated from the Inverter ( NPN ) - Internal supply