gefran SIEIDrive ADV100 - Motor Connection; Connection of Braking Resistor (Optional)

32 ADV100 • Quick installation guide - Specifications and connection
7.1.8 Motor connection
L1 L2 L3 BR C1 C D U V W
M
3 ph
L1 L2 L3 BR1BR2 C D U V W
M
3 ph
1040 - 3220
≥ 4300
PE2
PE2
7.1.9 Connection of braking resistor (optional)
L1 L2 L3 BR C1 C D U V W
Braking resistor
L1 L2 L3 BR1BR2 C D U V W
Braking resistor
1040 - 3220
≥ 4300
Note! The braking resistor is connected using standard terminals up to size ADV1..-3220. Optional terminals are required for sizes ADV1..-4300 … 5550 and none
for bigger sizes.
From size ADV1..-5750 upwards an optional BUy braking unit connected to terminals C and D can be used. For further details reference should be made to the
BUy manual.
Recommended combination braking resistors:
see paragraph 5.4.