gefran TPD32-EV-500 series - Speed Zero

—————— TPD32-EV ——————
228
6.13.4 Speed zero
ADD SPEED FUNCT
Speed zero
[107] Speedzerolevel[FF]
[108] Speedzerodelay[ms]
Parameter description No.
Value
Standard
Conguration
min max
Factory
American
Factory
Standard
Speed zero level [FF]
107 1 32767 10 10
-
Speed zero delay [ms]
108 0 65535 100 100
-
Speed zero thr
Drivenotrotating(0)
Driverotating(1)
395 0 1
*
*Thisfunctioncanbeassignedtoaprogrammabledigitaloutput.
Speed zero level SwitchthresholdforSpeed zero level.Thevalueappliestobothrotationdirectionsfor
theTPD32-EV...4Bconverters.Denedbytheunitsspeciedinthefactorfunction.
Speed zero delay Denitionofadelaytimeinmilliseconds,whenthezerospeedisreached.
Speed zero thr ”Speedzerothr”message“Driveturning”(viaaprogrammabledigitaloutput).
 High Driveturning
 Low Drivenotturning
TheLED“ZeroSpeed”islitwhenthedriveisnotturning.
Speed
Speed zero level [107]
Speed zero thr [395]
Speed zero delay [108]
Figure 6.13.4.1: Speed zero