gefran TPD32-EV-500 series - Jog Function

—————— TPD32-EV ——————
236
6.14.2 Jog function
FUNCTIONS
Jog function
[244] Enablejog
[265] Jogoperation
[375] Jogselection
[266] Jogreference[FF]
Parameter description No.
Value
Standard
Conguration
min max
Factory
American
Factory
Standard
Enable jog
Enabled(1)/Disabled(0)
244 0 1 Disabled Disabled -
Jog operation
265 - - - -
Jog selection
Speedinput(0)/Rampinput(1)
375 0 1 0 0 -
Jog reference [FF]
266 0 32767 0 0 **
Jog +
Nojogforwards(0)
Forwardsjog(1)
398 0 1 *
Jog -
Nobackwardsjog(0)
Backwardsjog(1)
399 0 1 *
*Thisfunctioncanbeassignedtooneoftheprogrammabledigitalinputs.
** Thisparametercanbeassignedtoaprogrammableanaloginput.
Enable jog Enabled EnabledJogfunction(thisselectionispossibleonlywhenthe
driveisswitchedoff).
 Disabled DisabledJogfunction
Jog operation Pressingthe“+”and“-”keysonthekeypadenablesthedrivetobemovedforwardand
backward.InconnectionwiththeTPD32-EV...4Bconvertersitispossibletooperate
theJogfunctioninananti-clockwiserotationbypressingthe“-”key.
 + Jogclockwiserotation
 - Jogcounter-clockwiserotation
Jog reference Referencevalueforjogmode.Denedbytheunits,speciedbythefactorfunction.
Jog selection ThisparameterdeterminesiftheJogfunctionreferencemustgothroughtherampor
directlytothespeedregulator.
 Speedinput TheJogreferenceisdirectlydened.Therampisnotactive.
 Rampinput TheJogreferenceisdenedwithasetramp.
Jog + High ClockwiseJogfunctionwhentheJogfunctionisenabledand
theStartcommandisnotpresent.
 Low Disabled
Jog - High Counter-clockwiseJogfunctionfortheTPD32-EV...4Bwhenthe
JogfunctionisenabledandtheStartcommandisnotpresent.