gefran TPD32-EV-500 series - Factor Function; Service

—————— TPD32-EV ——————
366
6.18.5 Factor function
DRIVECOM
Face value fact
[54] Facevaluenum
[53] Facevalueden
Dimension fact
[50] Dimfactornum
[51] Dimfactorden
[52] Dimfactortext
Thefactorfunctioncontainstwofactors,theDimensionfactorandFacevaluefactor.Theyarebothexpressed
asfractionnumbers.
Thedimensionfactorenablesthedrivespeedtobedenedinamachine-relateddimension,e.g.kg/horm/min.
FurtherinformationandexamplesaregiveninthesectionontheCongurationmenu.
Parameter description No.
Value
Standard
Conguration
min max
Factory
American
Factory
Standard
Face value num
54 1 32767 1 1
Face value den
53 1 32767 1 1
Dim factor num
50 1 65535 1 1
Dim factor den
51 1 2
31
-1 1 1
Dim factor text
52 rpm rpm
Dim factor num Numeratorofthedimensionfactor
Dim factor den Denomiatorofthedimensionfactor
Dim factor text Unitofthedimensionfactor.Thistextisshowninthedisplayofthekeypadwhenthe
referencevalueisshown.
 Possiblecharacters: /%&+,-.0..9:<=>?A...Z[]a...z
Face value num Numeratorofthereferencevaluefactor.
Face value den Denominatorofthereferencevaluefactor.
Seeexampleinsection6.11.7,“Dimensionfactor,Facevaluefactor”,onhowtomakethecalculation.
6.19 SERVICE
TheSERVICEmenuisonlyaccessiblefortheservicepersonnelofthemanufacturer.