EasyManua.ls Logo

gefran TPD32-EV-500 series - Page 290

gefran TPD32-EV-500 series
504 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
—————— TPD32-EV ——————
290
[695] PIsteadythr
[731] PIsteadydelay
[793] PinitgainPID
[734] IinitgainPID
[779] PIcentralvsel
[776] PIcentralv1
[777] PIcentralv2
[778] PIcentralv3
[784] PItoplim
[785] PIbottomlim
[783] PIintegrfreeze
[771] PIoutputPID
[418] RealFFPID
Parameter description No.
Value
Standard
Conguration
min max
Factory
American
Factory
Standard
PI P gain PID
765 0.00 100.00 10.00 10.00
PI I gain PID
764 0.00 100.00 10.00 10.00
PI steady thr
695 0 10000 0 0
PI steady delay
731 0 60000 0 0
P init gain PID
793 0.00 100.00 10.00 10.00
I init gain PID
734 0.00 100.00 10.00 10.00
PI central v sel
779 0 3 1 1
*
PI central v1
776 PIbottomlim PItoplim 1.00 1.00
PI central v2
777 PIbottomlim PItopLim 1.00 1.00
PI central v3
778 PIbottomlim PItopLim 1.00 1.00
**
PI top lim
784 PIbottomlim 10.00 10.00 10.00
PI bottom lim
785 -10.00
PItoplim
0.0 0.0
PI integr freeze
OFF(0)/ON(1)
783 0 1 0 0
*
PI output PID
771 0 1000xPItoplimit 1000 1000
Real FF PID
418 -10000 +10000 0 0
*Thisfunctioncanbesetonadigitalprogrammableinput
** Thisparametercanbesetonananalogprogrammableinput
PI P gain PID ProportionalgainofPIblock
PI I gain PID IntegralgainofPIblock
PI steady thr Thresholdfeed-forwardsurvey.IfFeed-fwd PID islessthanPI steady thr theintegral
regulationwillbefrozen,theproportionalgainassumesthevaluesetinP init gain PID.
WhenFeed-fwd PID overcomesthethreshold,theintegralregulationwiththegain
setinI init gain PID willbeenabled.ThePIblockwillmantainthegainsP init gain
PID andI init gain PID forthetimepresetthroughPI steady delay.Oncethisdelay
isover,theywillbebroughtautomaticallytoPI P gain PID andPI I gain PID.
PI steady delay TimeforwhichthegainsP init gain PID andI init gain PID havebeenkeptoperative
afterovercomingthefeed-forwardPI steady thr threshold.
ThedelaytimePI steady delay andtheresultingfunctionofinitialgainschangingalso,
operateonthetransitionLtoHoftheEnable PI PID parameter.

Table of Contents

Related product manuals