Gesipa 8000 - Maintenance Messages

10.2 Maintenance Messages
Navigation:
AUTO
►MAN
► Menu
► Maintenance
Maintenance menu
Maintenance
10.2 Maintenance Messages
Maintenance intervals can be set in the "Maintenance" menu. Necessary maintenance jobs are
then signalled in the AUTO main menu.
8 different maintenance messages are possible:
- 5 are assigned (see Section 10.1 "Maintenance" - "Maintenance Information")
- 3 can be freely defined.
Several maintenance messages are displayed simultaneously.
Column
Description
Counter
Cannot be set, however, the value can be reset to 0.
Piece count of the number of blind rivets processed since the last mainte-
nance.
Message
Setting range: 0 to 500,000 pieces
Maintenance message when "counter" reaches or exceeds the set value,
GAV does not stop.
Stop
Setting range: 0 to 500,000 pieces
Maintenance message when "counter" reaches or exceeds the set value,
GAV stops.
Default
Resets all settings to default.
10
- 56 -