10.1 Maintenance Information
Maintenance
10.1 Maintenance Information
W e e k l y:
To clean chute plates
Clean sliding surfaces of the chute plates
(do not use oil).
A s r e q u i r e d:
To oil rivet feed hose
(required after changing feed hose or
longer dry-running period)
- Press "OFF" button.
- Remove plug and fill with approx. 0.5 ccm
of oil.
- Reinsert plug.
- Press "ON" button.
- Perform several working cycles to distribute
the oil in the rivet feed hose.
To Next Page
Loading...
