MULTIPLE CALLS/CALL WAITING
1. When there is another incoming call during active call, users will hear a call waiting tone, with the LCD
displaying the caller name and ID for the incoming call. In the prompt window, it shows new incoming
call from "Bill" with the caller number; the account bar in purple is the current active call with "Ricky".
Figure 39: Call Waiting
2. Similar to single incoming call, if the incoming call is video call, users can choose "Audio Answer" or
"Video Answer" to answer the call.
3. Once the new call is answered, the current active call will be placed on hold. If the new call is rejected
by tapping on "Reject" softkey, the current active call will not be interrupted.
CALL HOLD
During the active call, press HOLD softkey on the bottom of the screen to put the call on hold. The LCD
screen will show as below. To resume the call, press UNHOLD softkey on the bottom of the screen.
To Next Page
Loading...
Need help?
General
