GRAPHTEC CE7000-60 - 5.2 Setting and Adjustment of ARMS

CE7000-UM-251-9370 7-68
7 DISASSEMBLY AND REASSEMBLY
Conrming the exible cable wiring from the control panel board to the main board
The exible cable has a right side and a wrong side, connect the exible cable correctly as shown in the
picture below.
[Main board side]
CE7000-40/60
Control panel exible cable
Conrm the printed side,
which is facing to the rear.
Control panel exible cable
Conrm the printed side,
which is facing to the up.
CE7000-130/130AP/60
[Control panel board side]
Control panel exible cable
Conrm the printed side,
which is facing to the down.
Conrm the printed side,
which is facing to the down.
Control panel board