CE7000-UM-251-9370 3-13
3 PARTS NAMES and FUNCTIONS
Attaching a pen
Attach a pen to the pen station�
• Please make sure to attach the pen to the pen station when setting up a pen�
• To prevent injury, avoid touching the pen immediately after the cutting plotter is turned on or whenever
the pen is moving
Procedure
(1) Manually open the holder arm by your hand, and then attach a pen to the pen station�
Holder arm
(2) When a pen is attaching to the pen station, t upper grooves of a pen to the upper part of pen station as
shown in the picture below�
Fit into upper grooves of a pen.
To Next Page
Loading...
