CE7000-UM-251-9370 4-2
4 OPER ATIONS
SLOW ............................. When pressing the POSITION key at the same time, the tool carriage moves
slowly.
When the “SLOW” icon is displayed on the screen, it works as a menu key.
When the [SLOW] key is pressed in the READY screen, the current cutting/plotting
area and the position of tool carriage are displayed.
1, 2, 3, 4.......................... Select the menu number displayed in the screen.
POSITION keys .............. Adjusts various settings, selects numerical value changes, moves the cursor, and
changes the positions in the MENU screen.
Reading the Screen (LCD)
Information reecting the status will be displayed in the screen of the control panel.
Name of the button and corresponding function is displayed on the screen when a function is allocated to the
button on the control panel. Button name will be displayed in reverse when the button is enabled.
Following items are displayed in the default screen.
Tool condition currently using
Corresponding button name
of control panel
Set condition of media
(READY status: It will display "READY" when the media is loaded)
Display of setting condition
Command : HP-GL : HP-GL command
GP-GL : GP-GL command
None : Command AUTO
Stepsize : 0.1 : 0.1 mm
0.05 : 0.05 mm
0.025 : 0.025 mm
0.001 : 0.001 mm
Rotate/mirror : R90 : Rotate 90 degrees
Mir : Mirror
R90 Mir : Rotate & Mirror
Priority : MANUAL : Manual priority
PROGRAM : Program priority
Sort : Sort ON : Displays when
sort is on
Prefeed : PREFEED : Displays when
auto matic media
feed is on
Media set lever raised Media set lever lower
�Ready screen
(READY)
Menu screen
(PAUSE/MENU)
Condition screen
(COND/TEST)
(Valid button is displayed in reverse)
Current tool number
Default screen (Ready Screen): READY
Display of Default Screen (Normal mode) Display of Default Screen (Simple mode)
To Next Page
Loading...
