GRAPHTEC CE7000-60 - Page 49

CE7000-UM-251-9370 4-3
4 OPER ATIONS
The condition number (Cut Condition) that has been set is displayed.
Screen to set the corresponding conditions is displayed when the [PAUSE/MENU] key or [COND/TEST] key
are pressed.
PAUSE/MENU COND/TEST
MENU screen
(Normal mode)
CONDITION screen
(Normal mode)
It will return to default
screen when the
[PAUSE/MENU]
key is pressed while
displaying MENU
screen.
It will return to
default screen when
the [COND/TEST] key is
pressed while displaying
CONDITION screen.
PAUSE/MENU COND/TEST
MENU screen
(Simple mode)
CONDITION screen
(Simple mode)
It will return to default screen
when [PAUSE/MENU] key
is pressed while displaying
MENU screen.
It will return to default screen
when [COND/TEST] key is
pressed while displaying
CONDITION setting screen.
Page number is displayed in the upper right corner of the screen if there are too many settings or selection
that will need multiple pages to display.
Press the position (pq) key to move different page.
[3] key
Page number
Page number
POSITION ( ▲
▼
) key
Example of moving page and operation button
(Normal mode)
Icon of the corresponding operation button is displayed in the screen to change the setting values.
Increase or decrease the setting
value using POSITION () key.
Select the change unit by [SLOW]
key.
Select the setting by
number keys (1, 2, 3, 4) or
POSITION () keys.
Example of screen to change the settings value