4-8
Chapter 4 Menu Operation
4.6 COPY
The designated number of copies of newest incoming data in memory is reproduced.
he designated number can be copied from 001 to 999.
(1) Plot the data that you would like to copy once. (The plot data is stored in the buffer.)
(2) Press the LOCAL key from the READY status, and the following is displayed.
'
'
'
'
P R I N T E R M E N U >
C U T T E R M E N U >
O U T P U T A L L >
(3) Press the F1 key (PRINTER MENU) and the following is displayed.
'
'
'
'
C O P Y >
D A T A C L E A R >
C O N D I T I O N >
1 / 4
(4) Press the F1 key (COPY) and the following is displayed.
'
'
'
'
C O P Y ?
< 0 0 1 >
N O . O F C O P I E S : ↑ ↓ ← →
Y E S : E N T E R N O : E S C
(5) With the POSITION keys (
◄►
), select the row you want to enter, then with the POSITION keys (
▲▼
), change the
number (0 to 9), and set the number of copies.
Execute the COPY with the ENTER key.
Press the ESC key to return to the previous screen.
When you want to stop a COPY in progress, press the LOCAL key.
After a while, the screen returns to the READY status. When there is no output data, the following
is displayed.
'
'
'
'
N O D A T A f o r C O P Y
P r e s s E N T E R ,
t o r e t u r n m e n u .
Y E S : E N T E R
When the ENTER key (YES) is pressed, the display returns to the previous screen.
To Next Page
Loading...