2-3
Chapter 2 Preparation for Printing
Types of Cutter Blades and Their Features
Model Name & Shape Diameter Utilized Plunger Use & Features
CB09UA Ø 0.9 mm PHP32-CB09N-HS Standard cutter for cutting colored film.
The below cut is appropriate for media
with a thickness under 0.25 mm.
Possible Cutting Length: App. 4000 m
When handling the cutter blades, take full care not to cut your hands.
If the cutter length is not adjusted with the utilized label materials (media), it will not be possible to achieve an optimal
cut. After adjusting the blade length, run a test cut and adjust further.
To Next Page
Loading...