1-2
Chapter 1 Product Summary
1.1 Installation
Installation Space
Please secure a space for installation as according to the below illustration.
When establishing the device on a table, please use a durable, solid table with a surface larger than 1000 mm × 400
mm.
Leave sufficient space for operations in front of and behind the printer.
Device Installation
• When setting up on a desk or work table, make sure there are two people to carry out the task.
• Use the assist handle in the media stocker section and avoid lifting the main unit.
(1) Install in a flat location.
(2) Adjust the four levelers (adjusters) so that the device is flat.
• Move Holding the Bottom of the Main Unit When Installing
• When the installed side is tilted, printing quality may be adversely affected.
• It is recommended that the device be installed on a flat surface.
To Next Page
Loading...