GRAPHTEC LABELROBO LCX603 - Part Names 3

1-7
Chapter 1 Product Summary
Part Names 3
.FEJBFKFDUJPOLOPC
-PDLMFWFS
3JCCPOTUPDLFSDPWFS
'SPOUDPWFS
3JCCPOMFWFS
Rbbonlever ...................................Makes it possible to print the ribbon cassette by closing the lever.
Rbbonstockercover ......................Cover that closes after the ribbon stocker is set.
Locklever .......................................A lever that secures the ribbon stocker cover when it is closed.
Medaejectonknob .......................Used when the media is detached.
Frontcover ......................................Cover for the ribbon stocker section.
Cutter Unit
5PPMIPMEFS
5PPMDBSSJBHF
$BNMFWFS
1VTISPMMFS
(SJUSPMMFS
$VUUJOHNBU
Cuttngmat .....................................Moves the top of the cutter blades and prevents blade abrasion.
Grtroller .........................................Feeds media and can move from side to side.
Pushroller
.......................................Thrusts the media into the grit roller.
Toolcarrage ...................................Section that moves the cutter forward or backward.
Toolholder ......................................Section that holds the cutter and moves up and down.
Camlever .......................................Moves the push roller vertically and secures/releases media when the media is set
in the cutting section.