1-6
Chapter 1 Product Summary
Emergency Stop Switch
Only use this in case of emergency or check before use.
Pressing the switch will cause the switch to become depressed.
In this state, turning the power switch to the On position ( | ) will not turn the power on.
Cautionary notes for turning power on again
Be sure to confirm that the power switch is in the Off () position.
When the power switch is in the Off position, you can turn it On by turning the emergency stop switch clockwise until
you hear the click and the switch pops up.
After confirming safety, turn the unit’s power switch to the On ( | ) position.
When turning the power on for the first time after implementing the emergency stop switch, push the
switch to the On position strongly.
To Next Page
Loading...