GRAPHTEC LABELROBO LCX603 - General SpecFCatOns

8-2
Chapter 8 Specifications
8.1 General Specifications
Items LCX603
Printer section
Printing system Thermal Ink-Transfer System
Resolution 600 × 1200 dpi, 600 × 600 dpi
Maximum number of printing
colors
3 colors (black + 2 colors)
Printing speed Maximum 35 mm/s
Maximum printing area 100 × 200 mm
Label materials (media) Width: 40 - 100 mm (depending on the media used)
Label materials (media) Feed direction: 65 - 200 mm
3 Color printing position
precision
±0.3 mm or less (after adjusting on the Adjustments Menu)
2 Color printing position
precision
Between 2 colors ±0.3 mm or less (after adjusting on the Adjustments Menu)
Minimum letter size 8 point*
Minimum line width 0.3 mm
Ink ribbon
Width
Length
: 120 mm
: 100 m
Label material
Width
Thickness
Winding
diameter
: 70/80/90/100/110/120/130 mm
: 25 μm, 50 μm, 80 μm, 85 μm
: can install up to 195 mm
Laminate material
Width
Winding
diameter
: 50/60/70/80/90/100/110 mm
: can install up to 140 mm
Winding-up form tube: core inside diameter 1 inch, width 140 mm (can use ink ribbon
cardboard cylinders)
Cutting section
Cutout system Half cut using blade (Supersteel)
Type cutter
Supersteel
Maximum cut area 100 mm × 200 mm
Maximum cut speed 300 mm/s
Printer section and cut
portion position Match
precision
0.5 mm or less/50 mm (after adjusting on the Adjustments Menu)
Separator Section
Winding Automatic winding
Winding-up form tube Core inside diameter 1 inch, width 140 mm (can use ink ribbon cardboard cylinders)
Cross Cut Section
Cut Cross Cut