GRAPHTEC LABELROBO LCX603 - NputtNg Adjustment Value for Adjustment Pattern -2 (Head 2)

4-31
Chapter 4 Menu Operation
Inputting adjustment value for adjustment pattern -2 (Head 2)
(1) Press the LOCAL key from the READY status and the below message will display.
'
'
'
'
P R I N T E R M E N U >
C U T T E R M E N U >
O U T P U T A L L >
(2) Press the F1 key (PRINTER MENU) and the below screen will display.
'
'
'
'
C O P Y >
D A T A C L E A R >
C O N D I T I O N >
1 / 4
(3) Press the NEXT key until the below screen appears.
'
'
'
'
P R I N T S E T T I N G >
P R I N T T E S T P A T T E R N >
H E A D A D J U S T M E N T >
2 / 4 P R I N T E D L E N G T H >
(4) Press the F3 key (HEAD ADJUSTMENT) and the below message will display.
'
'
'
'
A D J . P A T T E R N P R I N T >
D I S T A N C E A D J . >
H E A D 1 P O S . A D J . >
H E A D 2 P O S . A D J . >
(5) Press the F4 key (HEAD 2 POS. ADJ.) and the below message will display.
'
'
'
'
H E A D 2 P O S I T I O N A D J .
H E A D 2 - X >
H E A D 2 - Y >
'FFEJOHEJSFDUJPO
:
9
4FDPOEQBHF
.FBTVSFUIFJOUFSOBMWBSJBODF
)FBE3JCCPO3FE
<&YBNQMF>
)FBE3JCCPO#MVF
)FBE3JCCPO#MBDL
1SJOUFEXJUI)FBE
1SJOUFEXJUI)FBE
:
9
"NPVOUPGWBSJBODF
$PSSFDUJPOJOQVU9
"NPVOUPGWBSJBODF
$PSSFDUJPOJOQVU:
Using Head 3 (cross) as the standard, take a survey of how far Head 2 (line segment) can be displaced before it
overlaps.
For example in the above illustration, direction x and direction y are both misaligned in direction plus (+). As such, it is