4-44
Chapter 4 Menu Operation
(3) Press the NEXT key until the below screen appears.
'
'
'
'
L A N S E T T I N G >
M A C A D D R E S S >
4 / 4
(4) Press the F1 key (LAN SETTING) and the below message will display.
'
'
'
'
D H C P >
I P A D D R E S S >
S U B N E T M A S K >
G A T E W A Y >
(5) Press the F3 key (SUBNET MASK) and the below message will display.
'
'
'
'
S U B N E T M A S K
< x x x . x x x . x x x . x x x >
I N P U T : ← → ↑ ↓
Y E S : E N T E R N O : E S C
*The below message will display when DHCP is on. After confirming, press the escape key to return to full screen.
'
'
'
'
S U B N E T M A S K
< x x x . x x x . x x x . x x x >
R E T U R N : E S C
(6) Select the digits you wish to input with the POSITION keys (
◄►
), change the numerical value (0 to 9) with the
POSITION keys (
▲▼
), and program the subnet mask.
Press ENTER to confirm and return to the previous screen.
Press the ESC key to return to the previous screen.
Press the LOCAL key to return to READY status.
Gateway input / display
Program when "OFF" is selected in the DHCP settings.
The gateway IP address obtained from the DHCP server will display when "ON" is selected in the DHCP settings.
(1) Press the LOCAL key from the READY status and the below message will display.
'
'
'
'
P R I N T E R M E N U >
C U T T E R M E N U >
O U T P U T A L L >
(2) Press the F1 key (PRINTER MENU) and the below screen will display.
'
'
'
'
C O P Y >
D A T A C L E A R >
C O N D I T I O N >
1 / 4
(3) Press the NEXT key until the below screen appears.
'
'
'
'
L A N S E T T I N G >
M A C A D D R E S S >
4 / 4
(4) Press the F1 key (LAN SETTING) and the below message will display.
'
'
'
'
D H C P >
I P A D D R E S S >
S U B N E T M A S K >
G A T E W A Y >
(5) Press the F4 key (GATEWAY) and the below message will display.
'
'
'
'
G A T E W A Y
< x x x . x x x . x x x . x x x >
I N P U T : ← → ↑ ↓
Y E S : E N T E R N O : E S C
To Next Page
Loading...