GRAPHTEC LABELROBO LCX603 - Page 160

5-12
Chapter 5 Replacing Consumable Items
(5) Cut label materials around the press roller.
When cutting label materials, be careful not to damage the press roller and feed roller.
5SBOTGFSSPMMFS
.FEJBFKFDUJPOLOPC
1SFTTSPMMFS
$VU
(6) Pull out the cut label materials slowly.
Forcibly pulling out the label materials may result in damage.
• When replacing label materials, do not pull them out from the media stocker side.
• Pull out when the ribbon lever has been removed.
• Pull out while twisting the media ejection knob.
1VMMPVU
1MFBTFQVMMPVUGSPNBCPWF
XIJMFUVSOJOHUIFNFEJBFKFDUJPOLOPC
1MFBTFEPOPUQVMMPVUUPUIJTTJEF
1VMMPVU
NG