6.1 Daily Maintenance and Storage
Daily Maintenance and Storage
Perform with caution the following for daily maintenance and storage:
(1) Do not lubricate the plotter mechanisms.
(2) To clean the plotter's metal parts, either wipe the soiled areas with a dry cloth or with a cloth that has been
dampened with a neutral detergent diluted with water.
Do not use volatile solvents such as thinner, benzene, or alcohol to clean the printer as they will
cause damage to the main body surface.
(3) Wipe with a cloth applied with alcohol or a neutral detergent. Dust or residue that settles in the sensor section that
detects media may lead to a malfunction.
(4) After using the unit, cover the cloth over it in order to prevent the dust.
Storaging
Perform the following with caution for storaging when not in use.
(1) Remove the tool from the tool holder for storage.
(2) Remove the ink ribbon from the ribbon cassette and store the ribbon in order for the dust not to be attached to it.
(3) Cover the main body with a fabric to protect from dust.
(4) Store the printer in a location which is not subject to either direct sunlight or high humidity.
To Next Page
Loading...