GRAPHTEC LABELROBO LCX603 - Page 182

6-4
Chapter 6 Maintenance
(4) Pull up the lever (below diagram) which secures the ribbon stocker and pull it out.
4UFQ
4UFQ
-FWFS
(5) Scoop up the ribbon stocker when removing it.
1JO
3JCCPOTUPDLFS
(6) Make sure the ribbon stocker has been removed when cleaning the thermal heads and ribbon roller. Refer to "6.3
Cleaning the Thermal Head" and "6.4 Cleaning the Ribbon Roller
"
.