6-13
Chapter 6 Maintenance
6.9 Cleaning Push Roller
When label material such as refuse gathers on the push roller, there are cases where the label material shifts.
In that case, clean the push roller.
• Move the position of the push roller when the cam lever is opened (lowered).
• If the push roller is mounted on end of the label materials, the label material glue will adhere to the
push roller and may affect the degree of accuracy.
• Clean the push roller regularly (per one label material roll).
Cleaning
(1) Confirm that the power is in the "off".
(2) With your hand, lightly face the push roller toward to the back so that it is visible.
(3) Raise the push roller bar, and free the push roller.
(4) Clean the two push rollers with a cloth.
(5) Once the cleaning is finished, return the push roller to its original position.
To Next Page
Loading...