6-18
Chapter 6 Maintenance
6.14 Storing When Not Used for a Long Time
Perform the following with caution for storing when not in use.
(1) Remove the cutter section tool from the tool holder for storage.
(2) Remove the ink ribbon from the ribbon cassette and store the ribbon in order for the dust not to be attached to it.
(3) Cover the main body with a fabric to protect from dust.
(4) Store the printer in a location which is not subject to either direct sunlight, temperature, or high humidity.
(5) Remove the ribbon lever set.
(6) Open the press bar.
(7) Open the cam lever.
(8) Remove the label materials.
To Next Page
Loading...