7-17
Chapter 7 Troubleshooting
(2) Release the lock on top of the ribbon stocker section and open the ribbon stocker cover.
Raise the lever, then
slowly pull out the ribbon stocker.
4UFQ
4UFQ
4UFQ4UFQ
-PDLMFWFS
3JCCPOTUPLFSCBS
(3) Having slowly pulled out the ribbon stocker, slowly pull out the wrapped ink ribbon and label material.
When they cannot be pulled out, cut them, and pull them out.
Forcibly pulling out the label materials may result in damage. When the ink ribbon or the label
material cannot be pulled out, please contact the distributor where you purchased the unit or your
nearest Graphtec vender.
(4) Return the ribbon stocker section.(Refer to "2.8 Setting the Ink Ribbon".)
To Next Page
Loading...