2-53
Chapter 2 Preparation for Printing
2.16 When the Machine Stops During a Printing/Cutting Operation
It is possible to stop an operation during printing or cutting by pressing the LOCAL key.
In such a case, the operation stops within the data/operation range and the LOCAL menu displays.
If the LOCAL key is pushed in the middle of printing, the labels in the process of printing or haven't been cut yet (in
suspension) will not be completed normally.
After stopping the operation, use "copy" to resume printing/cutting.
Operating Instructions
(1) Press the LOCAL key when in operation.
The operation will stop within the data/operation range, and the following message will display.
'
'
'
'
P R I N T E R M E N U >
C U T T E R M E N U >
O U T P U T A L L >
To Next Page
Loading...