4-7
5
Perform the Ending Feed.
Press the POSITION (
) key from "<0001> Copies" in the
following screen.
“ENDING FEED” is displayed in the Copy screen
:KHQWKH>(17(5@NH\LVSUHVVHGWKHODEHOPDWHULDOFXWE\
the cutter unit is fed to the ejection part.
Feeding operation (approx.1 m) is executed.
After completing the cutting operation with the cutter unit, it
is used to eject the data that is between to the cutter unit and
cross cutter.
In this case, The cutter unit is not used to cut.
Pressing the ESC key returns to previous screen.
Press the POSITION (
) keys to display the “<0001>
Copies” in the screen that indicates the number of copies.
To Next Page
Loading...
