GRAPHTEC LABERLROBO DLC1000 - 1.1 Accessories and Components

1-2
1.1
Checking the Accessories
Accessories
Item Q'ty Item Q'ty
Power cable
1 pc.
DVD
• Various software
• User's Manual (pdf)
1 pc.
TO ENSURE SAFE AND CORRECT USE
1 pc.
Setup Manual
1 pc.
Roll holder
Flange A, Flange B, Shaft
(Use the shaft with a scale for the roll holder.)
3 set
Laminate holder
Flange (2 pcs.), Shaft
1 set
Separator winder bobbin, 6HSDUDWRUÁDQJHFROODU
6HSDUDWRUÁDQJHFROODU0DUNHGJURRYH
Separator flange collar
1 set
/DPLQDWHZLQGHUEREELQ6HSDUDWRUÁDQJHFROODU
6HSDUDWRUÁDQJHFROODU1RWPDUNHG
Separator flange collar
1 set
Dancer roller (1, 2)
2 set
Attachments
(Brackets: 2 pcs., Screws: 8 pcs.)
(Used to mount the cutter unit.)
1 set
* Other manuals may be added later separately.
Dedicated Accessories
Item Q'ty Item Q'ty
Cutter unit (CE6000-40DLC)
<The following components are not supplied with the
CE6000-40DLC>
:DWHUEDVHGÀEHUSHQ.)%.>3@
:DWHUEDVHGÀEHUSHQDGDSWHU
Carrier Sheet (CR09300-A3)
Roll-medium tray
Power cable
1 set
Stand (ST0106)
1 set