4-12
4.9
SENSING SPEED
Set the registration mark detection speed from “SENSING SPEED”.
Usually, set to “NORMAL”.
Due to the media to be sensed and the registration mark printing state, the machine may fail to sense the
registration mark. In such the case, “NORMAL” should be changed to “ISM”. By doing so, the sensing
performance of the registration mark will be improved.
When the "NORMAL" is set to the "ISM", the reading time of registration mark reading takes longer than
"NORMAL".
Operation
1
Press the [MENU] key in READY status.
MENU screen is displayed.
2
Press the POSITION ( ) keys to select “CHANGE
SETTINGS” (The item is highlighted.). Then, press [ENTER]
key.
CHANGE SETTINGS screen is displayed.
3
Press the POSITION ( ) keys to select “MARK”. Then,
press [ENTER] key.
MARK screen is displayed.
4
Press the POSITION ( ) keys to select “SENSING SPEED”.
Then, press [ENTER] key.
SENSING SPEED screen is displayed.
To Next Page
Loading...
