GRAPHTEC LABERLROBO DLC1000 - A.2 Supplies and Accessories

A-4
A.2
Supplies, Optional Accessories
Supplies (Laminate)
Type Model Name 6SHFLÀFDWLRQV
Laminate DLC -1110 R-PP-R1 LAMI transparent PP 111mm x 200m: 1 roll
DLC-1150R-PP-R1 LAMI transparent PP 115mm x 200m: 1 roll
DLC-1580R-PP-R1 LAMI transparent PP 158mm x 200m: 1 roll
DLC-1620R-PP-R1 LAMI transparent PP 162mm x 200m: 1 roll
DLC -1110 R-PET- R1 LAMI transparent PP 111mm x 200m: 1 roll
DLC-1150R-PET-R1 LAMI transparent PP 115mm x 200m: 1 roll
DL
C-1580R-PET-R1 LAMI transparent PP 158mm x 200m: 1 roll
DLC-1620R-PET-R1 LAMI transparent PP 162mm x 200m: 1 roll
Supplies (Paper core for winding up)
Type Model Name 6SHFLÀFDWLRQV
Paper core to wind up for
media
Inner diameter: 3 inches
DLP1000
DLC1000 Common
DLP-1315R-3CORE-R5 131.5 mm Without slit: 5 per set
DLP-1825R-3CORE-R5 182.5mm Without slit: 5 per set
DLP-1780R-3CORE-R5 178mm Without slit: 5 per set
DLP-1350R-3CORE-R5 135mm Without slit: 5 per set
DLP-1065R-3CORE-R5 106.5mm Both edges slit: 5 per set
DLP-1575R-3CORE-R5 157.5mm Both edges slit: 5 per set
DLP-1530R-3CORE-R5 153mm Both edges slit: 5 per set
DLP-1110R- 3CORE-R5 110 mm B ot h ed ges slit: 5 per set
P
aper core to wind up for
media
Inner diameter: 3 inches
(DLC1000 only)
DLC-535R-3CORE-R5 53.5mm Both edges + Center slit: 5 per set
DLP-790R-3CORE-R5 79mm Both edges + Center slit: 5 per set
P
aper core to wind up for
laminate
Inner diameter: 1 inch (with
matrix removing, laminate)
DLC-2270R-1CORE-R5 Laminate 1-inch paper core 227.0 mm: 5 per set
Recommended initial supply kit
Type Model Name 6SHFLÀFDWLRQV
Recommended initial
supply kit
DLC1000-RIS-KIT DLC-1620R-PP-R1
DLC-2270R-1CORE-R5
DLC-1575R-3CORE-R5
DLC-790R-3CORE-R5
OPH-A28
OPH-A29
www.delinit.by