GRAPHTEC LABERLROBO DLC1000 - Page 5

iii
Do not allow dust or metallic matter to adhere to
the power plug.
•
6XFKDFWLRQPD\UHVXOWLQHOHFWULFDOVKRFNRUDÀUHKD]DUG
due to current leakage.
Prohibited
Beware of
electrical shoc
k
Safety Precautions
WARNING
Handle cutter blades with care.
•
Avoid direct contact with the cutter blade. Touching the blade
with your bare hand may cause injury.
•
During a cutting operation, keep away from the cutter blade.
Do not use the power cord if it is damaged.
•
Use of a damaged cord may result in electrical shock or a
ÀUHKD]DUGGXHWRFXUUHQWOHDNDJH
•
Replace the power cord with a new one.
No touching
Unplug the power
cord from the socket