2-47
12
Paste the laminate (adhesive seal) on the label material so that it does not deviate while aligning the
laminate to the press roller.
Laminate (adhesive seal)
Backing sheet
13
Attach the backing sheet to the laminate winder bobbin by using tape.
If the backing sheet of laminate material is loosed, rewind it by turning the laminate winding bobbin.
)HHGWKHPHGLDZKLOHKROGLQJGRZQ>
@NH\)(('XQWLOWKHSDVWHRIODPLQDWHLVVWDELOL]HG
Tap e
To Next Page
Loading...
