5.5.2 Checking C.V Axle, Front Axle
1.Check:
• Rubber dust-P cover
Cracks/damage Replace
2.Check:
• double off-set assembly
• ball joint spline
• shaft spline
Wear/damage Replace.
• balls and ball races
• inner surface of double off-set
Pitting/wear/damage Replace.
·Check whether the inner and outer ball cage of the
left and right transmission shaft movement is
Smooth, ceaseless. If it is stagnation and obvious
becoming less loosen, replace it.
· Disassemble the left and right transmission
shaft ,cleaning and assemble it again.
NOTE
1. The dustproof rubber wrap on the ball cage
is not allow to contact with the gas and diesel
oil.
2. A slight scratch can damage the dust-proof
rubber wrap easily.
3. When reassembling the left and right
transmission shaft, in the ball cage must
sufficiently enter 2/3 volume with the Lithium
lubricating.
To Next Page
Loading...
